Mbps to MB/s Calculator

Convert a megabit-per-second link rate into megabytes per second, MiB/s and GB per hour.

What does this calculator do?

Internet plans, switch ports and WAN circuits are sold in megabits per second, while download progress and file copies are usually shown in megabytes per second. The conversion is a division by 8, since a byte is 8 bits — that is the whole rule. This calculator applies it, adds the IEC equivalent in MiB/s, and shows how much data the rate moves in an hour so you can sanity-check a transfer plan. The value produced is a theoretical rate conversion; it is not a promise about the speed you will observe. Units follow the standards exactly: kB, MB, GB and TB are powers of ten (1 GB = 10⁹ bytes) while KiB, MiB, GiB and TiB are powers of two (1 GiB = 2³⁰ bytes). The two ladders are never mixed, so "1 GB = 1024 MB" is not treated as a universal rule.

Formula

One byte is eight bits, so the numeric rate divides by eight.

MB/s  = Mbps ÷ 8
MiB/s = (Mbps × 10^6) ÷ 8 ÷ 2^20
GB per hour = (Mbps × 10^6 × 3600) ÷ 8 ÷ 10^9

How to use it

Enter the link rate exactly as it is advertised, in Mbps. If your figure is already in MB/s or in another unit such as Gbps or MiB/s, use the Bandwidth Converter instead. For a realistic planning figure, apply a protocol-efficiency factor to the result — 85% to 95% is typical on a clean wired path — with the Network Throughput Calculator.

Worked example

100 Mbps ÷ 8 = 12.5 MB/s. That is 11.920929 MiB/s, and sustained for a full hour it moves 45 GB. A 1,000 Mbps port works out at 125 MB/s and 450 GB per hour under the same ideal assumption.

Formula version1.0.0
FormulaMB/s = Mbps ÷ 8 MiB/s = (Mbps × 10^6) ÷ 8 ÷ 2^20 GB per hour = (Mbps × 10^6 × 3600) ÷ 8 ÷ 10^9
Precision6 decimals

Frequently asked questions

Why divide by 8 and not by 10?

The conversion between bits and bytes is exactly 8 bits per byte. Dividing by 10 is a rule of thumb some people use to absorb protocol overhead at the same time, but it mixes two separate things — do the unit conversion first, then apply an efficiency factor explicitly.

Why is my download slower than this?

The result is the line rate of the link. Real transfers lose capacity to Ethernet framing, IP and TCP headers, acknowledgements, retransmissions, congestion, TLS, disk speed and the server at the far end. Treat this figure as the ceiling.

Is 1 MB/s equal to 1 MiB/s?

No. 1 MB/s is 1,000,000 bytes per second and 1 MiB/s is 1,048,576 bytes per second. The two differ by about 4.9%, which is why the same transfer can show two different speeds in two different tools.

Sources

Related calculators

Last updated: 2026-08-10 · v1.0.0 · Report an error