Data Transfer Time Calculator

How long a transfer takes at a given link rate, with an optional efficiency factor.

This is a planning estimate, not a measurement or a guarantee. The result is a size-divided-by-rate model. It does not account for latency and TCP window limits, packet loss, retransmissions, congestion or shared links, protocol and encryption overhead, per-file processing on large file counts, or the speed of the storage and application at either end. Use it for planning, then verify with a real test transfer.

What does this calculator do?

Transfer time is the data size in bits divided by the rate in bits per second. The arithmetic is trivial; the traps are in the units. This calculator converts the size and the rate to a common base — bits — so a size in GB or GiB and a rate in Mbps or MB/s can be combined without error, and it applies an optional efficiency factor so you can plan against a realistic rate rather than the line rate. Results are given in seconds, minutes, hours and days. Units follow the standards exactly: kB, MB, GB and TB are powers of ten (1 GB = 10⁹ bytes) while KiB, MiB, GiB and TiB are powers of two (1 GiB = 2³⁰ bytes). The two ladders are never mixed, so "1 GB = 1024 MB" is not treated as a universal rule.

Formula

The nominal rate is scaled by the efficiency factor first, then the total bits are divided by it.

totalBits = size × unitFactor × 8
effectiveRate = nominalRate × (efficiency ÷ 100)
timeSeconds = totalBits ÷ effectiveRate

How to use it

Enter the data size and pick its unit — note whether your source reports GB (10⁹ bytes) or GiB (2³⁰ bytes), because the difference is about 7% at that scale. Enter the transfer rate and its unit, watching for bits versus bytes. Leave efficiency at 100 for the theoretical best case, or enter a realistic figure: roughly 90–95% for a clean local wired path, and often 50–80% across a WAN with latency, TLS and shared capacity.

Worked example

50 GB over a 100 Mbps link at 100% efficiency: 50 × 10⁹ bytes is 400,000,000,000 bits, and 400 Gbit ÷ 100 Mbps = 4,000 seconds — about 66.7 minutes, or 1.11 hours. At a more realistic 85% efficiency the same transfer takes about 4,706 seconds, roughly 1.31 hours.

Formula version1.0.0
FormulatotalBits = size × unitFactor × 8 effectiveRate = nominalRate × (efficiency ÷ 100) timeSeconds = totalBits ÷ effectiveRate
Precision2 decimals

Frequently asked questions

Why is my real transfer slower than the result?

The model divides size by rate and nothing else. It does not know about latency limiting a single TCP stream, packet loss, congestion, an overloaded server, slow disks at either end, per-file overhead on many small files, or encryption. Lower the efficiency figure to reflect them.

Does file count matter?

Yes, a great deal. One 50 GB file and 500,000 small files of the same total size behave very differently: the small-file case is dominated by per-file metadata operations and round trips, not by bandwidth. This calculator models bulk data only.

GB or GiB — which should I pick?

Use what your source reports. Drive vendors, cloud consoles and network tooling normally use GB (10⁹ bytes); many operating-system file managers report GiB while labelling it "GB". A 50 GiB figure is about 53.7 GB.

Sources

Related calculators

Last updated: 2026-08-10 · v1.0.0 · Report an error