What does this calculator do?
Data rates are quoted in three different families and confusing them is the most common bandwidth mistake. Link speeds are bit-based: a 100 Mbps port moves 100 million bits per second. File-transfer tools are byte-based: MB/s counts 10⁶ bytes per second. Some tools report the IEC rate MiB/s, which counts 2²⁰ bytes per second. This converter moves between all three families through a single exact base — bits per second — and always shows the Mbps, MB/s and MiB/s equivalents alongside your chosen unit. Units follow the standards exactly: kB, MB, GB and TB are powers of ten (1 GB = 10⁹ bytes) while KiB, MiB, GiB and TiB are powers of two (1 GiB = 2³⁰ bytes). The two ladders are never mixed, so "1 GB = 1024 MB" is not treated as a universal rule.
Formula
Everything is converted to bits per second first, then out to the target unit.
1 byte = 8 bits bitsPerSecond = value × unitFactor result = bitsPerSecond ÷ targetUnitFactor 1 Mbps = 10^6 bit/s 1 MB/s = 8 × 10^6 bit/s 1 MiB/s = 8 × 2^20 bit/s
How to use it
Enter the numeric rate, then pick the unit you have and the unit you want. Bit-based units use a lowercase b (Mbps), byte-based units use an uppercase B (MB/s), and IEC units carry an i (MiB/s). Read the unit on your source carefully: an ISP plan, a switch port and an iperf3 summary are usually in Mbps, while a browser download indicator and most copy dialogs are in MB/s.
Worked example
100 Mbps converted to MB/s: 100 × 10⁶ = 100,000,000 bit/s; divided by 8 gives 12,500,000 bytes per second, which is 12.5 MB/s. The same rate is 11.920929 MiB/s, because MiB/s divides by 2²⁰ instead of 10⁶.
Frequently asked questions
Why is 100 Mbps only 12.5 MB/s?
A byte is 8 bits, so a bit-based rate divides by 8 to become a byte-based rate. Nothing is lost — it is the same speed written in different units.
What is the difference between MB/s and MiB/s?
MB/s counts 10⁶ = 1,000,000 bytes per second (SI). MiB/s counts 2²⁰ = 1,048,576 bytes per second (IEC). MiB/s is about 4.9% smaller for the same underlying rate.
Will a 100 Mbps link really deliver 12.5 MB/s?
No — 12.5 MB/s is the theoretical line rate. Ethernet framing, IP and TCP headers, acknowledgements, retransmissions and encryption all consume part of it. Use the Network Throughput Calculator to apply an efficiency factor.
Sources
- NIST — Prefixes for binary multiples (IEC 80000-13): kibi/mebi/gibi are powers of 1024, while kilo/mega/giga are powers of 1000. This is why Mbit/s, MB/s and MiB/s are never mixed here.
- BIPM — The International System of Units (SI Brochure): decimal prefixes (k = 10³, M = 10⁶, G = 10⁹) and the second, the basis of every data-rate and transfer-time conversion.
- RFC 7323 — TCP Extensions for High Performance: the bandwidth-delay product and why a link needs a window of that size to stay full.
- Reviewed: 2026-08-10
Related calculators
Last updated: 2026-08-10 · v1.0.0 · Report an error