What does this calculator do?
Estimate SSD lifetime or required TBW from daily writes and write amplification.
Formula
The calculator applies this deterministic formula or algorithm:
days = TBW / (host writes/day × WAF)
How to use it
Enter the labelled values, choose the required mode and review the primary and secondary outputs. Lists may be pasted with one value per line or separated by semicolons.
Worked example
SSD rating (TBW) 600; Host writes per day (TB) 0.3; Write amplification factor 1 → Estimated days = 2000.
Assumptions
Inputs use the units and timing shown in the labels. Optional values default to zero. Rounding is applied only to displayed results.
Limitations
This is a planning estimate, not a failure prediction. Actual endurance depends on workload, firmware, spare area, temperature and the accuracy of the entered WAF.
Common mistakes
Keep rates, periods and units consistent; verify that pasted series are in the intended order and use editable coverage or overhead assumptions appropriate to your case.
Frequently asked questions
What assumptions does the SSD Endurance & TBW Calculator use?
Inputs use the units and timing shown in the labels. Optional values default to zero. Rounding is applied only to displayed results.
Does it send my inputs anywhere?
No. The calculation runs locally in your browser and uses no external calculation or lookup API.
Sources
- SNIA Dictionary — vendor-neutral definitions of RAID levels, stripe, mirror, parity, IOPS and raw versus usable capacity.
- NIST — Prefixes for binary multiples (IEC 80000-13): a drive sold as 2 TB (2 × 10¹² bytes) is about 1.82 TiB as reported by most operating systems, which is why raw and usable figures are shown in the unit you choose.
- Nominal equal-drive capacity model used here: RAID 0 = N × S, RAID 1 = S, RAID 5 = (N−1) × S, RAID 6 = (N−2) × S, RAID 10 = (N/2) × S. Filesystem overhead, metadata, hot spares, vendor reservations, compression and deduplication are not modelled unless you enter them.
- Reviewed: 2026-08-14
Related calculators
Last updated: 2026-08-14 · v1.0.0 · Report an error