Triangle Area Calculator

Triangle area from base and height, three sides (Heron) or two sides and an angle.

What does this calculator do?

Three standard ways to get a triangle’s area, depending on what you have measured: the base with its perpendicular height, all three sides (Heron’s formula), or two sides with the angle between them (the SAS formula). Pick the method that matches your data — all three give the same area for the same triangle. Use any length unit — as long as every input uses the same one, the results come out in that unit (areas in that unit squared).

Formula

One formula per method:

A = ½ × b × h
A = √(s(s−a)(s−b)(s−c)),  s = (a+b+c) ÷ 2
A = ½ × a × b × sin(C)
Triangle diagramA triangle with sides labelled a, b and c and a dashed height h.bach
Diagram not to scale.

How to use it

Choose the method first — the form only shows the inputs that method needs. The height must be perpendicular to the chosen base; the SAS angle is the one between the two sides you enter, strictly between 0° and 180°.

Worked example

Base 10 and height 6: A = ½ × 10 × 6 = 30. The same triangle measured as sides 7, 8 with included angle 60° gives A = ½ × 7 × 8 × sin(60°) = 24.2487 — a different triangle, hence a different area.

Formula version1.0.0
FormulaA = ½ × b × h A = √(s(s−a)(s−b)(s−c)), s = (a+b+c) ÷ 2 A = ½ × a × b × sin(C)
Precision4 decimals

Frequently asked questions

Which height do I use?

The perpendicular distance from the chosen base to the opposite vertex — not the length of a slanted side. If you only know the sides, use the three-sides (Heron) method instead.

Is the SAS angle in degrees?

Yes — enter the included angle in degrees, strictly between 0° and 180°. The calculator converts to radians internally before applying sin(C).

Why does Heron’s method reject my sides?

The three sides must satisfy the triangle inequality. If one side is as long as (or longer than) the other two combined, no triangle exists and the area is undefined.

Sources

Related calculators

Last updated: 2026-07-31 · v1.0.0 · Report an error